![]() You cannot make a temperature display board using this module. To support this, we have added RF remote control also so that it could be operated by anyone. Besides, we wanted to make very simple up and down counters that could be used by anyone who does not know anything about Arduino or programming. Later, when we succeeded in making the scoreboards, we wanted to release single-digit drivers and 3 digits up and down counters as a by-product of the Scoreduino project. The drivers were designed in this way because we first wanted to design scoreboards only and the up and down counter concept would be sufficient to build a scoreboard. Why is this limitation? Why was the driver designed in this way? Therefore, the module may become impractical for more than 3 displays. However, if you want to display, for example, 886, it will take around 5 seconds to count from 000 to 886. You won’t even notice that the Arduino counted 95 times. Suppose, to display a number, let’s say, 95, you need to send count pulse for 95 times to the module and it takes less than 1 second to count from 00 to 95. However, there are some possibilities also. Though it can be used with Arduino, please be mindful of its limitation, it is not like any other drivers which display any specific number. This is basically an UP and DOWN counter module.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |